LED Strips
The strips behind our crown, baseboard and cove lines. 24 V, high CRI, cut to length.
We supply and deliver LED strips to developers and builders in the Greater Toronto Area and Florida, with sample boards brought to your site.
See the models
Choose a model
COB, SMD 2835 or mini. Pick the line, then the output.
COB
DOT-FREE Dot-free. The strip for a seamless line inside the crown.
SMD 2835
ONE BOARD The 8 mm board, from high output to tunable white.
Mini
SIDE-EMITTING The 2 mm strip for the slot nothing else fits.
Three strips, one standard
The right chip for the line
COB for a dot-free line, SMD 2835 for output, mini 2 mm for tight slots.
24 V, CRI 90
2000 K to 6500 K. The same low voltage as our crown and baseboard channels.
Cut to length
Cut marks every 50 to 100 mm by model; the mini cuts anywhere.
Where it goes
Why it is GRF
Green
Up to 118 lm/W (SMD 2835) and 101 lm/W (COB) at 24 V (supplier's figures).
Resilient
Copper PCB with current stabilisation, LM-80 tested LEDs, 3-step MacAdam binning (supplier's data).
Fast
3M adhesive back, cut marks, plug connectors. Drops straight into our LED crown and baseboard channels.
Pairs with our LED baseboard and crown channels
Every LED crown and baseboard we supply has a strip inside. These are the strips.
- LED Crown Mouldingthe COB strip in the 13.3 mm channel
- LED Baseboardthe 2835 strip in the baseboard channel
- LED Neon Flex profilesthe 2835 strip inside AVH-NF01 to NF05
- Cabinet and shelf linesCOB or the 2 mm mini
- Mirror backlightthe COB strip, dot-free
- Day and evening scenesthe tunable white strip
See the strip lit inside the crown and the baseboard on our sample board.